Crop and canopy
Describe the target area, canopy shape and height so the spray arrangement can be matched to the task.
Directed spraying
GreenShine GSP-150 combines a tracked chassis with a directed spray arrangement. Compare the machine dimensions, spray assembly and refill routine with the work you need to do.
| Nominal tank capacity | 150 L |
|---|---|
| Spraying system | Directed spraying |
| Pump reference type | 26 |
| Nozzle count | 8 |
| Nominal travel speed | 80 m/min |
| Nominal spray width | 7 m |
| Overall dimensions (length × width × height) | 1520 × 530 × 1100 mm |
| Listed machine mass | 174 kg |
| Track width | 100 mm |
| Chassis width | 460 mm |
| Spray assembly height | 1600 mm |
| Example total spray flow | 10 L/min |
| Example time per tank | 15 min |
| Power system | Engine-generator hybrid system |
| Petrol engine | Loncin 170 · 4.4 kW |
Nominal spray width and height describe spray reach. They do not establish uniform coverage inside a crop canopy.
Liquid output changes with the nozzles, pressure and settings. The example output is separate from the pump type.
Example tank time is calculated from nominal tank capacity and example liquid output, rounded to minutes. Actual spraying time varies with the setup; it is separate from fuel or battery endurance.
An engine drives a generator for the electrical system. Refuelling, refilling and maintenance determine the working routine.
The quotation identifies the selected engine, spray arrangement, equipment and delivery scope.
Discuss spray assembly height and nozzle positioning for the target crop when choosing the configuration.
Describe the target area, canopy shape and height so the spray arrangement can be matched to the task.
Compare the narrowest clear passage and turning space with the overall machine dimensions, allowing operating clearance.
Balance refill frequency with the liquid load, ground conditions and the distance to your refill point.
Compare directed spraying with fan-assisted delivery, then consider nozzle position, pressure and application rate.
Check the machine dimensions, loading arrangement and transport capacity alongside the liquid load.
Discuss engine options, operating instructions, spare parts and the documents needed for your destination.
The range combines an engine with an electrical system, including engine-driven generation. The quotation identifies the travel drive, spraying equipment and electrical package supplied with the selected model.
Use the overall width with the spray assembly in the relevant transport or working position, plus operating clearance and turning space. Chassis width and nominal spray width do not describe the clear passage needed by the machine.
Compare liquid time per tank separately from fuel operating time and battery endurance. The table gives a calculated example tank time at an example liquid output. Refilling, refuelling, settings and maintenance affect actual continuous work.
Use clean water to measure actual nozzle output at the intended pressure, check travel speed and assess coverage in the target crop. Recheck after changing nozzles, pressure or speed. Set the application rate using the chemical label and supplied operating instructions.
The GreenShine GSP-150 shown in this range uses the hybrid configuration. Battery-only voltage, battery capacity and endurance figures do not describe this model.
Send the destination, quantity and selected model or application. The quotation will set out the configuration and delivery scope so you can compare the offer.
Share your delivery country and intended application so we can review the configuration, required documents, logistics and service arrangements with your quotation.
Ask for the document list for the exact model, configuration and destination. Check the documents for the equipment included in your quotation.
Use the cleaning procedure for the supplied configuration and intended chemical, including the tank, liquid circuit and nozzle assembly. Confirm the operating manual, spare-parts list, written warranty scope and service arrangements with the quotation.
Send your model choice, quantity and destination, or start with the task. You can add site details as the configuration discussion progresses.
Request a configuration quoteRequest sprayer documents